DM/V600-4E1-PCI

Dialogic
Dialogic Logo

Dialogic DM/V600-4E1-PCI 60-Port DM3 Series Digital Media Board, Voice

Details

Name Value
Product DM/V600-4E1-PCI
Make Dialogic
Base PCI 746
Type Media Boards
Lead Time Request Quote for Lead Time
Quantity in Stock Request Quote for Quantity in Stock

Specs

Name Value
Form Factor PCI CompactPCI
Network Interface DM/V480-4T1, DM/V960-4T1 – 4 T-1 ISDN PRI trunks DM/V600-4E1, DM/V1200-4E1 – 4 E-1 ISDN PRI trunks
Operating System Windows 2003 Linux Windows NT Windows 2000
Part Number DM/V600-4E1
Ports DM/V480-4T1 – 48 DM/V600-4E1 – 60 DM/V960-4T1 – 96 DM/V1200-4E1 – 120
Resource Bus H.100/H.110 CT Bus
Signaling ISDN PRI CAS (R2MF)
System Size Service Provider/Large Enterprise

Features

  • Available with either full- or half-density voice resources
  • Built on the industry-standard telephony bus – ECTF H.100/H.110 CT Bus
  • Four T-1 or E-1 digital network interfaces with internationally approved CAS and ISDN PRI

Datasheet

application/pdf

Filename:

3967_DMV960_1200_480_600_d-74757562s.pdf

Size:

160 KiB

Extracted Text

Four T-1 or E-1 digital network interfaces with internationally
approved CAS and ISDN PRI
Lets applications connect to a variety of signaling networks
worldwide, facilitating faster time-to-market with global
deployment
Available with either full- or half-density voice resources Offers ability to choose different boards with either 1:1 or
1:2 voice to network interface ratio, which may be suitable
in certain environments such as inbound call centers,
providing fewer wasted resources and considerable board
savings
Built on the industry-standard telephony bus — ECTF
H.100/H.110 CT Bus
Lets applications expand through access to other
communication boards, such as IP telephony, ATM, HDSI,
and SS7, as well as combined media resource boards such
as the Dialogic® DM/V3600BP Media Board
Features Benefits
The Dialogic® DM3 Media Boards are an integral part of many
high-density media server solutions. They provide voice processing and
many other standard features including tone signaling, global tone
detection, global tone generation, and call progress analysis. These
boards are well-suited for many configurations and applications where
enhanced media such as speech recognition, fax, and conferencing are
not required. These boards can also be combined with other Dialogic®
boards (switching, fax, or combined media) to provide enhanced media
resources in a single system, thereby providing significant cost savings.
Datasheet
DM3 Media Boards
Dialogic® DM3 Media Boards
Products Discussed in This Datasheet
• Dialogic® DM/V480-4T1 Voice Board
• Dialogic® DM/V960-4T1 Voice Board
• Dialogic® DM/V1200-4E1 Voice Board
• Dialogic® DM/V600-4E1 Voice Board
Because the boards are available in both H.100 (PCI) and H.110 (CompactPCI) compliant universal form factors, they are
excellent for service providers and large enterprise applications. This flexibility lets developers build single applications for
deployment on either industry-standard form factor. Each board provides access to four T-1 (1.544 Mb/s) or E-1 (2.048
Mb/s) digital network interfaces, and up to 120 ports of voice and telephony signal processing.
Datasheet Dialogic® DM3 Media Boards
2
Technical Specifications
Maximum boards per system Application, call traffic, and CPU dependent
CT Bus PCI: ECTF H.100 compliant CT Bus, offering onboard switching access to 4096 bidirectional
64 kb/s DS-0 time slots
SCbus interoperability through adapter
68-pin ribbon cable connector
CompactPCI: ECTF H.110 compliant CT Bus, offering onboard switching access to 4096
bidirectional 64 kb/s DS-0 time slots
Digital interfaces 4 T-1 or 4 E-1
Control processor Intel i960C
Digital signal processors PCI and CompactPCI: Motorola 56303; 6 DSPs @ 100 MHz each
Control processor memory 8 MB
DSP memory PCI and CompactPCI: 256 K word DRAM local to each DSP
128 K word SRAM local to each DSP
Baseboard global memory 32-bit wide DRAM accessible to all signal processors and control processor
Cache prompts 4 MB to 8 MB
Supported operating systems Windows®; Linux. Details at http://www.dialogic.com/systemreleases
CSP No
Signaling ISDN PRI CAS robbed-bit (T1); R2MF (E1)
Host Interface
Bus compatibility PCI: Rev 2.2 of PCI Bus Specification
CompactPCI: Rev 2.1 of PCI Bus Specification
Bus mode Target and DMA master mode operation
Host interface memory 512 KB
Support 3.3 V or 5 V signaling environment (universal connectivity)
Platforms
Form factors PCI: Universal PCI long card, single-slot width
12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge
retainer)
0.79 in. (2 cm) wide (total envelope)
3.87 in. (9.83 cm) high (excluding edge connector)
CompactPCI: 6U Eurocard form factor, single-slot width
PBA, including faceplate, handles, and connectors
10.43 (265) mm long
8.27 in. (210 mm) wide
.79 in. (20 mm) high
Network connectors PCI: 4 RJ-48C on rear bracket
CompactPCI: Provided through rear I/O transition modules (not included with board) BNC for
75 Ohm lines
RJ-48C for 100 Ohm and 120 Ohm lines
Power Requirements
PCI
Configuration +5 VDC +12 VDC –12 VDC +3.3 VDC
DM/V960-4T1-PCI 19.25 W 0.360 W N/A N/A
DM/V1200-4E1-PCI 19.25 W 0.360 W N/A N/A
DM/V480-4T1-PCI 19.25 W 0.360 W N/A N/A
DM/V600-4E1-PCI 19.25 W 0.360 W N/A N/A
Compact PCI
Configuration +5 VDC +12 VDC –12 VDC +3.3 VDC
DM/V960-4T1-cPCI 19.34 W 1.1 W N/A 2.04 W
DM/V1200-4E1-cPCI 19.34 W 1.1 W N/A 2.04 W
DM/V480-4T1-cPCI 19.34 W 1.1 W N/A 2.04 W
DM/V600-4E1-cPCI 19.34 W 1.1 W N/A 2.04 W
Dialogic® DM3 Media Boards Datasheet
3
Technical Specifications (cont.)
Environmental Requirements
PCI and CompactPCI
Operating temperature +32°F (0°C) to +122°F (+50°C)
Cooling condition per maximum +122°F (+50°C) — 2.3 CFM per board
operating temperature +104°F (+40°C) — 1.5 CFM per board
+86°F (+30°C) — 1.1 CFM per board
Storage temperature –4°F (–20°C) to +158°F (+70°C)
Humidity 8% to 80% noncondensing
Telephone Interface DSX-1 T-1
Clock rate 1.544 Mb/s ±32 ppm
Level 3.0 V (nominal)
Pulse width 323.85 ns (nominal)
Line impedance 100 Ohm ±10%
Other electrical characteristics Complies with AT&T TR62411 and ANSI T1.403-1989
Framing SF (D3/D4)
ESF for ISDN
Line coding AMI
AMI with B7 stuffing
B8ZS
Clock and data recovery Complies with AT&T TR62411 and Telcordia TA-TSY-000170
Jitter tolerance Complies with AT&T TR62411 and ANSI T1.403-1989
Connectors RJ-48C
Telephony bus connector H.100 (PCI) and H.110 (CompactPCI) style connectors
Loopback Supports switch-selectable local analog loopback and software selectable local digital loopback
Zero code suppression Bell ZCS (Jam bit 7)
GTE ZCS (Jam bit 8)
Digital Data Service ZCS
No zero code suppression
Telephone Interface CEPT E-1
Network clock rate 2.048 Mb/s ±50 ppm
Internal clock rate 2.048 Mb/s ±32 ppm
Level 2.37 V (nominal) for 75 Ohm lines
3.0 V (nominal) for 120 Ohm lines
Pulse width 244 ns (nominal)
Line impedance 75 Ohm, unbalanced
120 Ohm, balanced
Other electrical characteristics Complies with ITU-T Rec. G.703
Framing ITU-T G.704-1988 with CRC4
Line coding HDB3
Clock and data recovery Complies with ITU-T Rec. G.823-1988
Jitter tolerance Complies with ITU-T Rec. G.823, G.737, G.739, G.742-1988
Connectors BNC for 75 Ohm lines
RJ-48C for 120 Ohm lines
Telephony bus connector H.100 (PCI) and H.110 (CompactPCI) style connectors
Loopback Supports switch-selectable local analog loopback and software selectable local digital loopback
Datasheet Dialogic® DM3 Media Boards
4
Technical Specifications (cont.)
Approvals and Compliance
Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs
Safety and EMC
Canada ICES-003 Class A
ULc 60950 File E96804
Europe EN60950
EN55022
DEN55024
Japan VCCI Class A
United States FCC Part 15 Class A
UL 60950 File E96804
International IEC60950
CISPR 22
CISPR 24
Telecom Approvals
United States EBZUSA-31207-XD-T
Canada IC:885-7969A
European Union DoC 01/10/2003
Country-specific approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/
or contact your Authorized Distributor
Reliability/Warranty
Estimated MTBF Per Telecordia Method I Case I
PCI: 87,000
CompactPCI: 106,000
Warranty Warranty information at http://www.dialogic.com/warranties
Audio Signal
Usable receive range –40 dBm0 to 0 dBm0 nominal, configurable by parameter**
Automatic gain control Application can enable/disable output level, configurable by parameter**
Silence detection –40 dBm nominal, software adjustable**
Transmit level (weighted average) –12.5 dBm nominal, configurable by parameter**
Transmit volume control 40 dB adjustment range, with application-definable increments and legal limit cap
Frequency Response
24 kb/s 300 Hz to 2600 Hz ±3 dB
32 kb/s 300 Hz to 3400 Hz ±3 dB
64 kb/s 300 Hz to 3400 Hz ±3 dB
Audio Digitizing
24 kb/s OKI ADPCM @ 6 kHz sampling
32 kb/s OKI ADPCM @ 8 kHz sampling
48 kb/s G.711 PCM (µ-law for T-1 and A-law for E-1) @ 6 kHz sampling rate
64 kb/s G.711 PCM (µ-law for T-1 and A-law for E-1) @ 8 kHz sampling rate
64 kb/s Linear 8 kHz 8-bit WAV
128 kb/s Linear 8 kHz 16-bit WAV
88 kb/s Linear 11 kHz 8-bit WAV
176 kb/s Linear 11 kHz 16-bit WAV
Digitization selection Selectable by application on function call-by-call basis
Playback speed control Pitch controlled
Available on the following 8 kHz coders: OKI ADPCM, G.711 PCM, Linear
Adjustment range: ±50%
Adjustable through application or programmable DTMF control
DTMF Tone Detection
DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec. 6
Dynamic range (T-1) –36 dBm to +3 dBm per tone, configurable by parameter**
(E-1) –39 dBm to 0 dBm per tone, configurable by parameter**
Minimum tone duration 32 ms; can be increased with software configuration
Interdigit timing Detects like digits with a >45 ms interdigit delay
Detects different digits with a 0 ms interdigit delay
Acceptable twist and frequency variation (T-1) Meets Telcordia LSSGR Sec 6 and EIA 464 requirements
(E-1) Meets ITU-T Q.23 recommendations**
Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power
line noise tolerance
Cut-through (T-1) Local echo cancellation permits 100% detection with a >4.5 dB return loss line
(E-1) Digital trunks use separate transmit and receive paths to network
Performance dependent on far-end handset’s match to local analog loop
Talk-off Detects less than 10 digits while monitoring Telcordia TR-TSY-000763 standard speech
tapes (LSSGR requirements specify detecting no more than 470 total digits)
Detects 0 digits while monitoring MITEL speech tape #CM 7291
Global Tone Detection
Tone type Programmable for single or dual
Maximum number of tones Application-dependent
Frequency range Programmable within 300 Hz to 3500 Hz
Maximum frequency deviation Programmable in 5 Hz increments
Frequency resolution ±5 Hz. Separation of dual frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of
20 dB
Timing Programmable cadence qualifier, in 10 ms increments
Dynamic range (T-1) Default set at –36 dBm to +3 dBm per tone, programmable
(E-1) Default set at –39 dBm to +0 dBm per tone, programmable
Global Tone Generation
Tone type Generate single or dual tones
Frequency range Programmable within 200 Hz to 4000 Hz
Frequency resolution 1 Hz
Duration 10 ms increments
Amplitude (T-1) –43 dBm0 to –3 dBm0 per tone nominal, programmable
(E-1) –40 dBm0 to +0 dBm0 per tone nominal, programmable
MF Signaling (T-1) R1
MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321
Transmit level Complies with Telcordia LSSGR Sec 6, TR-NWT-000506
Signaling mechanism Complies with Telcordia LSSGR Sec 6, TR-NWT-000506
Dynamic range for detection –25 dBm to +3 dBm per tone
Acceptable twist 6 dB
Acceptable freq. variation Less than ±1 Hz
MF Signaling (E-1) R2
MF digits All 15 forward and backward signal tones per ITU-T Q.441
Transmit level –8 dBm0 per tone, nominal, per ITU-T Q.454; programmable
Signaling mechanism Supports the R2 compelled signaling cycle and non-compelled pulse requirements per ITU-
T Q.457 and Q.442
Dynamic range for detection –35 dBm to –5 dBm per tone
Acceptable twist 7 dB
Acceptable freq. variation Less than ±1 Hz
Dialogic® DM3 Media Boards Datasheet
5
Technical Specifications (cont.)
Call Progress Analysis
Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97
countries as specified by ITU-T Rec. E., Suppl. #2
Default uses both frequency and cadence detection
Application can select frequency only for faster detection in specific environments
Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries
as specified by ITU-T Rec. E., Suppl. #2
Uses both frequency and cadence detection
Positive voice detection accuracy >98% based on tests on a database of real-world calls in North America
Positive voice detection speed Detects voice in as little as 1/10th of a second
Positive answering machine detection Standard
Fax/modem detection Preprogrammed
Intercept detection Detects entire sequence of the North American tri-tone
Other intercept tone sequences can be programmed
Dial tone detection before dialing Application enable/disable
Supports up to three different user-definable dial tones
Programmable dial tone drop out debouncing (when not part of regulatory approval)
Tone Dialing
DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506, ITU-T Q.23
Frequency variation Less than ±1 Hz
Rate 10 digits/s, configurable by parameter**
Level (T-1) –4.0 dBm per tone, nominal, configurable by parameter**
(E-1) –7.5 dBm per tone, nominal, country-specific**
Protocols
T-1 CAS E&M (wink start, immediate start), loop start, ground start; feature group A, B, and D
T-1 ISDN NI-2, 4ESS, 5ESS, DMS100, DMS250, INS1500, Q.Sig
E-1 CAS Many country-specific MFC-R2 variants
For more details, refer to the latest Dialogic® Global Call Protocol Package release notes
E-1 ISDN NET5, DPNSS, DASS2,Q.Sig
Additional Components
• Multidrop CT Bus cables (CBLCTB68C3DROP, CBLCTB68C4DROP, CBLCTB68C8DROP,
CBLCTB68C12DROP, CBLCTB68C16DROP)
• CT Bus/SCbus adapter (CTBUSTOSCBUSADP)
• SCbus terminator kits (1SCBUS1TERMKIT, 2SCBUS1TERMKIT, 3SCBUS1TERMKIT)
• Rear I/O module for CompactPCI boards
— Unkeyed (works in all chassis): CPCIREARRJ48, CPCIREARE1120, REARIOV19E175
— Keyed (works only in PICMG 3.x chassis): CPCIREARRJ48KYD, CPCIREARE1120KY, REARIOV19E175KY
• 120 Ohm to 75 Ohm converter (supplied by a third party)
Ordering Information
Product Code Order Code Description
DMV9604T1PCIW 882-692 96-port Digital T1, voice, PCI
DMV12004E1PCIW 882-691 12-port Digital E1, voice, PCI
DMV12004E1PCIWCN 882-742 12-port Digital E1, voice, PCI, for China
Datasheet Dialogic® DM3 Media Boards
6
Technical Specifications (cont.)
www.dialogic.com
To learn more, visit our site on the World Wide Web at http://www.dialogic.com
Dialogic Corporation
9800 Cavendish Blvd., 5th floor
Montreal, Quebec
CANADA H4M 2V9
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR
IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED
AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC® PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice.
Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only
be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the
trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement.
Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products
mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses
required to implement their concepts or applications, which licenses may vary from country to country.
None of the information provided in this datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the
product and any benefits specified are not guaranteed.
Positive Answering Machine Detection/Positive Voice Detection
These performance results were measured using specific computer systems and/or components within specific lab environments and under specific system
configurations. Any difference in system hardware, software design, or configuration may affect actual performance. The results are furnished for informational use
only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies.
Outbound Dialing/Telemarketing
Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic® products will satisfy the requirements of any
such laws or regulations (including, without limitation, any regulations dealing with telemarketing).
**Configurable to meet country-specific PTT requirements. Actual specification may vary from country to country for approved products.
Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 3967-06

Manual

No manual found...

FAQs

Is the DM/V600-4E1-PCI available today?

New DM/V600-4E1-PCI are no longer continuously manufactured, and therefore supply is scarce. However, at GID Industrial we specialize in sourcing hard-to-find products, and although the lead time varies, the average is between 5-7 business days.

What does the DM/V600-4E1-PCI typically cost?

Our pricing is based on several factors including availability and delivery requirements. GID Industrial offers highly-competitive pricing as well as superb customer service. Please feel free to contact us to receive a quote for the DM/V600-4E1-PCI.

Does my purchase include a warranty? What if it’s damaged?

GID Industrial’s refunds, repairs, and exchanges are covered by a 30-day warranty period after purchase. If an extended warranty is purchased, the product is completely guaranteed throughout its warranty term.

I'm an international company. Can we still do business together?

Absolutely! We service customers globally. With rare exception, GID Industrial ships worldwide.

What options for payment are available to purchase the DM/V600-4E1-PCI?

At GID Industrial, we accept all major credit cards as well as company checks and wire transfers. Additionally, at the direction of our customers, we have also worked with escrow companies to complete payment transactions.

Which carriers handle your shipping?

Typically, we use major carriers, including UPS, FedEx, USPS, and DHL. If our customer has a particular shipping requirement, we will work with other carriers to ship the product.

Does GID offer repair services?

We do provide repair services for this product. Our team of engineers is experienced with the DM/V600-4E1-PCI and is able to examine, diagnose and repair it quickly and efficiently. Please contact us today to learn more about our repair services.

Can GID Industrial assist me in managing the lifecycle of the DM/V600-4E1-PCI?

Most definitely! GID specializes in managing industrial equipment product phases. By tracking the life cycle of not only obsolete, but current, products, we provide a valuable resource to our customers, and excel above our competitors.

Can you help move excess, phased out inventory?

We often work with companies to assist with moving and migrating excess parts and inventory. Often, companies sell off end-of-life product for just its scrap value. Instead, we work to obtain top market value for companies looking to dispose of their excess industrial parts and equipment. GID Industrial has worked with not only the DM/V600-4E1-PCI but also a wide variety of products.

Call for Price and Availability

+1-888-443-4456
local: +1-469-283-2440

or

Spinner